Problema con el Squelch del Yaesu VR5000

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 29 Dic 2010, 01:15

aoc escribió:Buenas noches.

Pues vaya jugada que te han hecho migueldj80. ¿No les has dicho nada? ¿Te han comentado lo que supuestamente era el problema?
Como dice rampus no creo que haya sido Locura Digital si no de donde te lo han "arreglado".

Es lo que comentas rampus tu puedes tener un equipo bien cuidado/mimado y resulta que un día te toca llevarlo al SAT y éstos te dan el cambiazo por otro que a lo mejor su antiguo dueño ha sido un desastre.

Yo tengo el mismo problema con el SQUEL y que tampoco recibe en HF y si os digo la verdad no me apetece nada que le den el cambiazo.


Un saludo.
Alberto


Si, me quejé el mismo dia que recibi el equipo , pero no he recibido ninguna respuesta cuando solian ser rapidos en responder a las consultas. tambien es verdad que me desahogué bastante, tildando la jugada de "una vergüenza" pero... cosas que pasan. Al menos parece que el aparato funciona como esperaba, salvo que me va a tocar desmontar el frontar y ajustar bien las piezas puesto que no está bien montado (controles duros y algunas juntas por fuera del conjunto)
Supongo que será la primera y ultima vez que haga esto. No están estos tiempos como para echar el dinero a la basura y que encima te traten asi
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 29 Dic 2010, 23:23

Pues sea Locura Digital, o el SAT de yaesu propio... el unico perjudicado soy yo, que quieres que te diga. Si, el escaner va, pero no es el mio y para colmo me han sajado por algo que deberia cubrirlo la garantia, que para eso está. Pero claro, cogen, me encasquetan uno con el nº de serie" arrancado" como dicen ellos y ... que se joda el cliente. Pues no me parece bien y para colmo, pongo una queja en la web y aqui no dice nadie nada. Ahi ya están dando la imagen que tienen, escondiendose y pasando de ofrecer una solucion o al menos una explicación
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor EA539URE » 15 Abr 2011, 10:10

Sin rodeos y al grano. Sinceramente pienso que Locura Digital debería dar una explicación a todo este entuerto. Equipos sin pegatina de serial o cambiado, garantías que no se cumplen, entrega de equipo diferente, demora en responder a quejas.... No se tú, pero a mi todo esto me huele muy muy mal.

Salud,
Paco, Murcia
RX: ICOM IC-756, Yaesu FT-897/FT-7800, Kenwood TR751/TM241, Drake R8, Roadstar TRA-2350P, Sangean ATS-909, Degen DE1103, Uniden UBC-785XLT
Antenas: Dipolos, delta, verticales, LW, loop
http://webs.ono.com/ea5fww_radioescucha
Avatar de Usuario
EA539URE
Aficionado experimentado
Aficionado experimentado
 
Mensajes: 432
Registrado: 23 May 2008, 23:11
Ubicación: Murcia, ciudad sin ley

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 30 May 2011, 11:50

Será eso porgadora, el caso es que ahora tengo el VR120 en parecidas condiciones, y ya me da cosa enviarlo al SAT. Ahora que si lo hago, a este le echo fotos y lo que haga falta porque no me fio ni un pelo ya de esta gente xD
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 01 Jun 2011, 10:25

Gracias juan-ito, pero ya para eso es tarde. El escaner nada mas recibirlo, lo vendí porque necesitaba el dinero, asi que ya da igual. De todas formas el otro escaner veré a ver que hago, imagino que lo enviaré ya que no me pilla cercana ninguna tienda ya que soy de Linares y aqui no hay ninguna cercana, está entre Madrid o Sevilla creo recordar y me sale mas económico mandarlas por mensajería.

Gracias de todas formas por el interes y si, con estos casos hay que hacer todo lo que sea porque está claro que sea de quien sea la culpa, el que siempre sale perdiendo es el cliente.
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor javier1976 » 01 Jun 2011, 15:53

Saludos miguel no soy de la zona ,pero en verano voy a sabiote y la tienda recomendad en la zona es mabril radio la direccion es la siguiente :

Av. Ciudad de Linares, 8
Ubeda (Jaén) Teléfono: 953751043

, se encuentra en ubeda por lo que la tienes cerquita de linares


un saludo javier
-x2 UNIDEN BCT15x
-KENWOOD TS850S HF
-ICOM IC 706 HF
-ICOM IC 208 VHF-UHF
-ANYTONE AT 6666 CB-
-RADIODITY GD77 DMR
-RETEVIS RT90 DMR
-HOTSPOT RASBPERRY DMR
-X3 BAOFENG UV5RA
-DIVERSOS RTLSDR
DMR ID 2145322
INSTAGRAM : ea5hyj.javier

Valencia
Avatar de Usuario
javier1976
Obsesionado con la radio
Obsesionado con la radio
 
Mensajes: 2076
Registrado: 30 Ago 2004, 12:57
Ubicación: Valencia-IN99TN

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 03 Jun 2011, 11:21

eb5bxa escribió:Saludos miguel no soy de la zona ,pero en verano voy a sabiote y la tienda recomendad en la zona es mabril radio la direccion es la siguiente :

Av. Ciudad de Linares, 8
Ubeda (Jaén) Teléfono: 953751043

, se encuentra en ubeda por lo que la tienes cerquita de linares


un saludo javier


Si, la conozco.Alli fui a comprar alguno de los equipos de 2 m que tengo, pero creo que cerraron hace un tiempo aunque tendré que comprobarlo. ¡Gracias!
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor javier1976 » 03 Jun 2011, 15:52

No esta donde antes el año pasado estube por alli y esta en la misma avenida que carrefor direccion centro ciudad la verdad es que no se explicartelo exactamente donde por que no soy de alli , pero fui de paso y me llamo la atencion por eso , por que la havian cambiado de direccion




un saludo javier
-x2 UNIDEN BCT15x
-KENWOOD TS850S HF
-ICOM IC 706 HF
-ICOM IC 208 VHF-UHF
-ANYTONE AT 6666 CB-
-RADIODITY GD77 DMR
-RETEVIS RT90 DMR
-HOTSPOT RASBPERRY DMR
-X3 BAOFENG UV5RA
-DIVERSOS RTLSDR
DMR ID 2145322
INSTAGRAM : ea5hyj.javier

Valencia
Avatar de Usuario
javier1976
Obsesionado con la radio
Obsesionado con la radio
 
Mensajes: 2076
Registrado: 30 Ago 2004, 12:57
Ubicación: Valencia-IN99TN

Re: Problema con el Squelch del Yaesu VR5000

Notapor migueldj80 » 04 Jun 2011, 09:50

eb5bxa escribió:No esta donde antes el año pasado estube por alli y esta en la misma avenida que carrefor direccion centro ciudad la verdad es que no se explicartelo exactamente donde por que no soy de alli , pero fui de paso y me llamo la atencion por eso , por que la havian cambiado de direccion




un saludo javier


Si, he estado mirando por google maps y el sitio exacto es este:

http://maps.google.es/maps?hl=es&ie=UTF ... 16,,0,0.12

Gracias compañero!
Baofeng UV-5R
migueldj80
 
Mensajes: 22
Registrado: 04 Ago 2009, 08:50

Re: Problema con el Squelch del Yaesu VR5000

Notapor Rapidbit » 18 Nov 2014, 23:52

Aunque es un hilo bastante antiguo, este es el manual para calibrar el Squelch, lo he hecho hace un par de semanas y queda como nuevo.
--------------
Hidden Menu procedures.

SQL and S-Meter Adjustments

1) Turn the receiver off.
2) Press and hold [F] and [SCAN] keys; while holding them in, press and hold the [PWR] switch until the radio powers on. You are now in the alignment mode.
3) Set the receiver to 145.10000 MHz, with 100 kHz frequency steps.
4) Connect the RF Signal Generator to the antenna jack.
5) Press the [M/S] button to select the main VFO which should be tuned to 145.10000.

FM-N Mode Squelch Level Adjustment (Main Band)

1) Set the receiver to the FM-N mode.
2) Press the [SCAN] button to select “Set M-SQL THRESH (FM)”.
3) Tune the signal generator to the same as the radio with +/- 3.5 kHz deviation @ 1 kHz tone modulation, and set the output level for –5dBu at the antenna jack, then press the [ENT] button.
4) Press the [SCAN] button to select “Set M-SQL TIGHT (FM)”.
5) Tune the signal generator to same frequency as radio with +/- 3.5 kHz deviation @ 1kHz tone modulation, and set the output level for +10 dBu, then press the [ENT] button.

AM Mode Squelch Level Adjustment (Main Band)

1) Set the receiver to AM mode.
2) Press the [SCAN] button to select “Set M-S THRESH (AM)”.
3) Tune the signal generator to the same as the receiver with 400 Hz tone modulation, and set the output level for –5 dBu then press the [ENT] button.
4) Press the [SCAN] button to select “Set M-S TIGHT (AM)”.
5) Tune the SG to the same as radio with 400 Hz tone modulation and set the output for +10dBu then press the [ENT] button.

FM-N Mode S-Meter Adjustment (Main Band)

1) Set the rcvr to the FM-N mode.
2) Press the [SCAN] button to select “Set MAIN S-METER 1”.
3) Tune the SG to the same as radio with +/- 3.5 kHz deviation @ 1 kHz tone modulation and set the output level for –5 dBu the press the [ENT] button.
4) Set the radio to the AM mode.
5) Press the [SCAN] button to select “Set MAIN-S METER 5”.
6) Tune the SG to the same as radio with 400 Hz tone modulation and set the output level to +20 dBu then press the [ENT] button.

FM-W Mode Squelch Level Adjustment (Main Band)
1) Set the radio to WFM mode.
2) Press the [SCAN] button to select “Set M-S THRESH (WFM)”.
3) Tune the SG to the same as radio with +/-22.5 kHz deviation @ 1kHz tone modulation and set the output level to +5 dBu then press the [ENT] button.
4) Press the [SCAN] button to select “Set M-S TIGHT (WFM)”.
5) Tune the SG to the same as radio with +/-22.5 kHz deviation @ 1kHz tone modulation and set the output level for +15 dBu then press the [ENT] button.

FM-W Mode S-Meter Adjustment (Main Band)
1) Set the radio to the WFM mode.
2) Press the [SCAN] button to select “Set M.S-METER 1 (WFM)”.
3) Tune the SG to the same as radio with +/-22.5 kHz deviation @ 1 kHz tone modulation and set the output level for +8 dBu then press the [ENT] button.
4) Press the [SCAN] button to select “Set M.S-METER 5 (WFM)”.
5) Tune the SG to the same as radio with +/-22.5 kHz deviation @ 1kHz tone modulation and set the output level for +30 dBu and press the [ENT] button.


Press the [M/S] button to select the SUB vfo band

FM-N Mode Squelch Level Adjustment (SUB Band)
1) Set the radio to 145.10000 MHz with 100 kHz steps.
2) Set to FM-N mode.
3) Press the [SCAN] button to select “Set S-SQL THRESH (FM)”.
4) Tune the SG to same as radio with +/-3.5 kHz deviation @ 1 kHz tone modulation and set the output level to –3dBu and press the [ENT] button.
5) Press the [SCAN] button to select “Set S-SQL TIGHT (FM)”.
6) Tune the SQ to the same as radio with +/-3.5kHz deviation @ 1kHz tone modulation and set the output level to +10 dBu then press the [ENT] button.

AM Mode Squelch Level Adjustment (Sub Band)
1) Set the radio to the AM mode.
2) Press the [SCAN] button to select “Set SUB S THRESH (AM)”.
3) Tune the SG to the same as radio with 400 Hz tone modulation and set the output level to –3 dBu then press the [ENT] button.
4) Press the [SCAN] button on the panel to select “Set SUB S TIGHT (AM)”.
5) Tune the SG to same as radio with 400 Hz tone modulation and set the output to +10 dBu then press the [ENT] button.

FM-N Mode S-Meter Adjustment (SUB Band)
1) Set the radio to the FM-N mode.
2) Press the [SCAN] button to select “Set SUB S-METER1”.
3) Tune the SG to the same as radio with +/-3.5kHz deviation @ 1 kHz tone modulation and set the output level to –3 dBu then press the [ENT] button.
4) Press the [SCAN] button to select “Set SUB S-METER 5”.
5) Tune the SG to the same as radio with +/- 3.5kHz deviation @ 1kHz tone modulation and set the output level to +20 dBu and then press the [ENT] button.

Press the [SCAN] button to select “Set LEVEL END” and then press the [ENT] button.
----------------------
Saludos.
Rapidbit
Aficionado
Aficionado
 
Mensajes: 108
Registrado: 01 Dic 2011, 22:16

Re: Problema con el Squelch del Yaesu VR5000

Notapor CANFRANC » 04 Ene 2015, 11:42

Mi vr120 cuando recibo en uhf lo hago con ruido mucho sofrito en las demas bandas limpio no se si trasteando e tocado algun parametro me podeis ayudar que menu mirar y como se resetea para dejarlo como en fabrica gacias y feliz año.
CANFRANC
Aficionado
Aficionado
 
Mensajes: 102
Registrado: 09 Feb 2005, 16:31
Ubicación: BARCELONA

Anterior

Volver a Yaesu

¿Quién está conectado?

Usuarios registrados: ajzapata, delta1, Google [Bot]